2018 Toyota Highlander Oil Type and Capacities

Toyota recommends that for all oil changes in the 2018 Toyota Highlander, genuine Toyota motor oil is used.

I have done the work for you and found genuine oil and filter products on Amazon to make it that much easier for you.

The 2018 Toyota Highlander requires 5.8 q of 0W-20 in the 3.5 L engine and 4.6 q in the 2.7 L engine. See the chart below for filter recommendations as well.

Engine	Oil Type	Capacity	Filter
2.7 L Gas (1AR-FE)	0W-20	4.6 q (4.4 L)	Toyota Oil Filter 04152YZZA1
3.5 L Gas (2GR-FKS)	0W-20	5.8 q (5.5 L)	Toyota Oil Filter 04152YZZA1

If Toyota engine oil is not available, an oil that meets the ILSAC-GF-5 multigrade oil specifications can be used.

Additionally, Toyota states that if SAE 0W-20 is not available, 5W-20 can be used in its place, but should only be used one change in a row.

The information provided in this article was taken from the 2018 Toyota Highlander owner’s manual and 2018 Toyota Highlander Hybrid Owners Manual unless otherwise stated. It is your responsibility to make sure you use the appropriate oil in your truck.

2.7 L 1AR-FE Engine

The 2018 Toyota Highlander 2.7 L engine requires 4.6 q of 0W-20 engine oil.

It also requires 04152YZZA1 Toyota Engine Oil Filter.

Filter information was found from Parts.toyota.com at the following source: 2018 Toyota Highlander Engine Oil Filter – 04152YZZA1

3.5 L 2GR-FKS Engine

The 2018 Toyota Highlander 3.5 L engine requires 5.8 q of 0W-20 engine oil.

It also requires 04152YZZA1 Toyota Engine Oil Filter.

Filter information was found from Parts.toyota.com at the following source: 2018 Toyota Highlander Engine Oil Filter – 04152YZZA1