For the most longevity and efficiency of the Subaru Outback, synthetic oil should be used as well as genuine parts. You may go to the service station to get an oil change.
Here you will find all of these parts required to perform an oil change. I have done the work for you and found genuine oil and filter products on Amazon to make it that much easier for you.
The 2015 Subaru Outback requires 5.1 q of 0W-20 for the 2.5 L engine and 6.9 q of 5W-30 for the 3.6 L engines. See the chart below for all recommendations.
Engine | Oil Type | Capacity | Filter |
2.5 L | 0W-20 | 5.1 q (4.8 L) | 15208AA15A |
3.6 L | 5W-30 | 6.9 q (6.5 L) | 15208AA031 |
Looking for an oil change?
We have some special offers for our readers for oil changes at Valvoline!
Click each offer below to redeem
An oil that meets the ILSAC-GF-5 multigrade oil specifications is required.
The information provided in this article was taken from the 2015 Subaru Outback Owner’s Manual unless otherwise stated. It is your responsibility to make sure you use the appropriate oil in your truck.
2.5 L Engine
The 2015 Subaru Outback 2.5 L engine requires 5.1 q of 0W-20 engine oil.
It also requires Subaru 15208AA12A Oil Filter.
Oil Filter reference: parts.subaru.com
Subaru 0W-20 Full Synthetic Oil
Amazon Affiliate Link
Engine oil for 2015 2.5 L Subaru Outback
Subaru 15208AA12A engine oil filter
Amazon Affiliate Link
Engine oil filter for 2015 2.5 L Subaru Outback
3.6 L Engine
The 2015 Subaru Outback 3.6 L engine requires 6.9 q of 5W-30 engine oil.
It also requires Subaru 15208AA031 Oil Filter.
Oil Filter reference: parts.subaru.com
Subaru 5W-30 Synthetic Oil
Amazon Affiliate Link
Engine oil for 2015 3.6 L Subaru Outback
Subaru 15208AA031 engine oil filter
Amazon Affiliate Link
Engine oil filter for 2015 3.6 L Subaru Outback
Looking for an oil change?
We have some special offers for our readers for oil changes at Valvoline!
Click each offer below to redeem